SVN에러!!___Failed to add 'XXX' : object of the same name already exists :: 이클립스 팁[SSISO Community]
 
SSISO 카페 SSISO Source SSISO 구직 SSISO 쇼핑몰 SSISO 맛집
추천검색어 : JUnit   Log4j   ajax   spring   struts   struts-config.xml   Synchronized   책정보   Ajax 마스터하기   우측부분

이클립스 팁
[1]
등록일:2009-06-26 09:35:08 (0%)
작성자:
제목:SVN에러!!___Failed to add 'XXX' : object of the same name already exists
Failed  to  add  'XXX'  :  object  of  the  same  name  already  already  exists
'XXX'를  추가하는데  실패했다  :  같은  이름의  객체가  이미  존재합니다.

  

1.

This  error  message  typically  occurs  when  you  try  to  update  your  working  copy.  
이  메시지는  대체로  작동중인  복사물을  갱신하려할때  발생한다.

It  is  thrown  because  Subversion  never  deletes  or  overwrites  existing  local  data.  
하위  버전이  기존의  로컬  데이터를  전혀  지우거나  겹쳐쓰지  못하면  그  메세지가  던저진다.

There  may  be  three  reasons  why  you  get  this  error:
당신이  이러한  에러를  얻는  3가지  이유가  있을지도  모른다.

You  have  a  local  unversioned  file  with  the  same  name  as  a  file  which  has  been  added  by  somebody  else  recently.  
당신은    누군가에  의하여  최근에  추가된  파일처럼  같은  이름의    local  unversioned  file  을  가지고  있다.

In  this  case  the  solution  is  to  move  your  local  file  somewhere  else  (or  rename  it),  then  update.  
이러한  경우에  해결책은  당신의  로칼파일을  그밖에  어딘가로  옮기고  (아니면  이름을  바꾸거나)  그런다음  갱신하라.

Afterwards  you  can  decide  whether  the  two  files  need  to  be  combined  in  some  way,  or  if  the  choice  of  name  is  purely  coincidental  you  can  give  your  file  a  different  name.  
그런후에  당신은  두  파일이  어떻게  해서든  결합될  필요가  있는지  ,아니면  그러한  이름의  선택이  적절하다면  당신이  사용하는  파일에  다른  이름을  넣을수  있는지  결정할수  있다.

  

2.

A  file  has  been  renamed  in  the  repository,  but  it  differs  only  in  case,  like  Install.txt  to  install.txt,  and  you  have  local  changes.  
파일이  저장소에서  이름이  바뀌었지만  단지  Install.txt  에서  install.txt  처럼  대소문자만  다르며  로컬  상태에서  변경한다.

When  you  update,  you  end  up  in  a  situation  (1),  where  the  modified  local  file  appears  as  unversioned.
갱신할때,  1번과  같은  상황이  되고,  그  상황에서  변경된  로컬  파일은  버전화되지  않은것처럼  나타난다.

Move  it  somewhere  else,  update,  then  sort  out  the  mess.    
그  파일을  그외  다른곳으로  옮기고  갱신한  다음  해결하라.

  

  

  

3.
There  are  actually  2  different  files  in  the  repository  whose  names  differ  only  in  case.  
실제로  단지  대소문자형태가  다른  2개의  파일이  저장소에  존재한다.

This  cannot  work  on  a  Windows  checkout,  because  the  Windows  file  system  is  not  case-sensitive.  
윈도우  파일  시스템이  대문자와  소문자를  구별하지  못하기때문에  이것은  윈도우  체크아웃에서  작동하지  못한다.

It  is  likely  that  one  of  the  files  got  added  by  mistake,  so  you  need  to  find  out  which  one,  make  sure  there  are  no  changes  committed  to  the  wrong  file,  then  delete  it.  
파일중에  하나가  실수로  추가되었을지도  모른다,  그러므로  그것이  어떤건지  찾아서  잘못된  파일에  아무런  수정도  하지  않았음을  확인하고  그것을  지운다.

  

  


There  are  several  ways  to  solve  the  problem  and  to  prevent  it  from  happening  again.  
이러한  문제를  해결하고  재발을  방지하기위한  여러가지  방법이  있다.

Take  a  look  at  these  instructions.
다음  지시를  보자.

  

  


Uppercase/lowercase  file  name  conflicts  on  Windows
대소문자  파일명은  윈도우상에서  충돌한다.


There  is  a  server  hook  script  available  at:  http://svn.collab.net/repos/svn/trunk/contrib/hook-scripts/  that  will  prevent  checkins  which  result  in  case  conflicts
http://svn.collab.net/repos/svn/trunk/contrib/hook-scripts에서  이용가능한  서버훅  스크립트가  있는데  그것은  대소문자의  충돌을  일으키는  체크인을  방지할  것이다.

If  you  already  have  two  files  with  a  name  that  differs  only  in  case,  
이미  대소문자형이  다른  이름을  지닌  두개의  파일을  가지고  있다면,

you  have  to  decide  which  one  of  them  you  want  to  keep  and  delete  (or  rename)  the  other  one  from  the  repository.
둘  중에  어떤  파일을  유지할  것이고  나머지를  저장소에서  지우던가  이름을  바꾸던가  결정해야한다.


There  are  (at  least)  two  possible  solutions  to  rename  a  file  without  losing  its  log  history.  
로그기록을  잃지않고  파일의  이름을  바꿀수  있는  방법이  (적어도)2가지가  있다.

It  is  important  to  rename  it  within  subversion.  
하위버전안에서  그  파일의  이름을  바꾸는  것은  중요하다.

Just  renaming  in  the  explorer  will  corrupt  your  working  copy!!!
탐색창에서  이름을  바꾸는  것은  작동중인  복사물에  오류를  일으킬  것이다.

  


Solution  A)  (recommended)  권장

1.  Commit  the  changes  in  your  working  copy.  
  작동중인  복사물을  수정하라

2.  Rename  the  file  from  UPPERcase  to  upperCASE  directly  in  the  repository  using  the  repository  browser.  
  저장소  브라우저를  이용하여  저장소내의  파일을  UPPERcase  에서  upperCASE로  직접적으로  바꿔라.

3.  Update  your  working  copy.  
  작동중인  복사물을  갱신하라.

  

  


Solution  B)

1.  Rename  from  UPPERcase  to  UPPERcase_  with  the  rename  command  in  the  TortoiseSVN  submenu.  
  TortoiseSVN의  서브메뉴에  있는  rename명령으로  UPPERcase  에서  UPPERcase_  로  이름을  바꾼다.  

2.  Commit  the  changes.  
  수정한다.

3.  Rename  from  UPPERcase_  to  upperCASE.  
  UPPERcase_  에서  upperCASE로  이름을  바꾼다.  

4.  Commit  the  changes.  
  수정한다.

[출처]  SVN에러!!___Failed  to  add  'XXX'  :  object  of  the  same  name  already  exists|작성자  잭켈리

[본문링크] SVN에러!!___Failed to add 'XXX' : object of the same name already exists
[1]
코멘트(이글의 트랙백 주소:/cafe/tb_receive.php?no=31536
작성자
비밀번호

 

SSISOCommunity

[이전]

Copyright byCopyright ⓒ2005, SSISO Community All Rights Reserved.